Logitech G920 Pedal Wire (1 Viewer)

[WIS-RoryMcCann]

Hello All, I have fallen victim to buying second hand on ebay, i opened up my pedals to clean them, and noticed the worst botch job on the connection wire. I noticed intermittently the brake presses when using the clutch and accelerator.

Anyone know where I can find a replacement wire, will Logitech support help with this.

If I have to buy a new set of pedals any reccomendations for pedals?

Thanks

 

[WIS-RoryMcCann]

 

[Puffpirat]

Don’t think you can get a replacement cable but you could fix it with this:

 

[WIS-RoryMcCann]

Perfect ill see of I can grab them somewhere

 

[Tom]

If you're not comfortable soldering & heatshrinking them, a terminal block will do the trick.

 

[WIS-RoryMcCann]

If you're not comfortable soldering & heatshrinking them, a terminal block will do the trick.

Yeah I don't have the equipment or I would, got a few butt connectors on the way see if that helps.

 

[FuBii]

twist the connections together & electrical tape would do the job in an emergency as long as it's signal & not power cables

 

[WIS-RoryMcCann]

twist the connections together & electrical tape would do the job in an emergency as long as it's signal & not power cables

Yeah I am just waitin on amazon to deliver my tape, ill give that a try

 

[ramdrop]

I have some Thrustmaster T3PA-Pro pedals that I need to get rid of, I bought them back in November 2017, used them pretty much solidly for 2 years - they're well looked after, cleaned and the cable hasn't snapped. I bought some Fanatec V3's on black friday November 2019 so they went back in the box.

The only thing I would note is the little connector clip that goes into the back of my Thrustmaster base is a little worn (like an ethernet connector).

 

[WIS-RoryMcCann]

I have some Thrustmaster T3PA-Pro pedals that I need to get rid of, I bought them back in November 2017, used them pretty much solidly for 2 years - they're well looked after, cleaned and the cable hasn't snapped. I bought some Fanatec V3's on black friday November 2019 so they went back in the box.

The only thing I would note is the little connector clip that goes into the back of my Thrustmaster base is a little worn (like an ethernet connector).

Thanks Ill see if I can fix these first

 

[johnismyname0]

hiya, ive also had this problem with pressing accelerator and the brake and clutch go off, did you manage to fix this or did you manage to find a replacement wire?