- Joined
- Sep 16, 2016
- Messages
- 202
- Reaction score
- 157
Hey guys,
my problem is related to AMS2 but since it's running on the PC2 engine I thought I'd post it here.
I'm using three Dell S3220DGF 1440p monitors and I can recommend these. To cope with the performance requirements, I've created a 5760x1080 144 Hz custom resolution and a bezel corrected 5840x1080 one. It works just fine with rF2, ACC and AC but with AMS2/PC2 I do have misalignments and graphical glichtes. See here:
Non-bezel corrected 5760x1080 144 Hz (with triple screen spanning enabled in the AMS2 settings)
THAT'S THE SETTING I WANT TO GET RIGHT
Bezel corrected 5840x1080 144 Hz (with triple screen spanning disabled in the AMS2 settings)
WORKS BUT STRECHTED, DON'T LIKE IT
Non-bezel corrected 7680x1440 144 Hz (with triple screen spanning enabled in the AMS2 settings)
IT'S FINE BUT PERFORMANCE ISN'T THAT GREAT
Bezel corrected 7780x1440 144 Hz (with triple screen spanning disabled in the AMS2 settings)
WORKS BUT STRECHTED, DON'T LIKE IT, WORSE PERFORMANCE ON TOP OF THAT
What can I do to get the non-bezel corrected resolution to work right like the regular 1440p resolution? I'd like to use the per-screen-rendering and want to avoid the strechted bezel-corrected resolution but fiddling around with the "triplescreensettings.xml" didn't help here. Even when putting the correct measurements and resolution (1920x1080 because of the custom resolution) into the file I get the disastrous result you can see above.
Any suggestions?
Thanks for your help
my problem is related to AMS2 but since it's running on the PC2 engine I thought I'd post it here.
I'm using three Dell S3220DGF 1440p monitors and I can recommend these. To cope with the performance requirements, I've created a 5760x1080 144 Hz custom resolution and a bezel corrected 5840x1080 one. It works just fine with rF2, ACC and AC but with AMS2/PC2 I do have misalignments and graphical glichtes. See here:
Non-bezel corrected 5760x1080 144 Hz (with triple screen spanning enabled in the AMS2 settings)
THAT'S THE SETTING I WANT TO GET RIGHT
Bezel corrected 5840x1080 144 Hz (with triple screen spanning disabled in the AMS2 settings)
WORKS BUT STRECHTED, DON'T LIKE IT
Non-bezel corrected 7680x1440 144 Hz (with triple screen spanning enabled in the AMS2 settings)
IT'S FINE BUT PERFORMANCE ISN'T THAT GREAT
Bezel corrected 7780x1440 144 Hz (with triple screen spanning disabled in the AMS2 settings)
WORKS BUT STRECHTED, DON'T LIKE IT, WORSE PERFORMANCE ON TOP OF THAT
What can I do to get the non-bezel corrected resolution to work right like the regular 1440p resolution? I'd like to use the per-screen-rendering and want to avoid the strechted bezel-corrected resolution but fiddling around with the "triplescreensettings.xml" didn't help here. Even when putting the correct measurements and resolution (1920x1080 because of the custom resolution) into the file I get the disastrous result you can see above.
Any suggestions?
Thanks for your help
Last edited: